[ANSYS, Inc. Logo] return to home search
next up previous contents
Step 6: Cell Zone Conditions

figure Cell Zone Conditions

1.   Set the conditions for the fluid in the duct ( fluid-9).

figure Cell Zone Conditions figure figure fluid-9 figure Edit...

figure

(a)   Change the Zone Name from fluid-9 to fluid-duct.

(b)   Retain the default selection of air from the Material Name drop-down list.

(c)   Click OK to close the Fluid dialog box.

2.   Set the conditions for the fluid in the first plenum and hole ( fluid-8).

figure Cell Zone Conditions figure figure fluid-8 figure Edit...

(a)   Change the Zone Name from fluid-8 to fluid-plenum1.

(b)   Retain the default selection of air from the Material Name drop-down list.

(c)   Click OK to close the Fluid dialog box.

3.   Set the conditions for the fluid in the second plenum and hole ( fluid-9.1).

figure Cell Zone Conditions figure figure fluid-9.1 figure Edit...

(a)   Change the Zone Name from fluid-9.1 to fluid-plenum2.

(b)   Retain the default selection of air from the Material Name drop-down list.

(c)   Click OK to close the Fluid dialog box.

next up previous contents Previous: Step 5: Operating Conditions
Up: Using a Non-Conformal Mesh
Next: Step 7: Boundary Conditions
Release 12.0 © ANSYS, Inc. 2009-02-09