ANSYS FLUENT 12.0 UDF Manual - 6.2 Hooking Model-Specific UDFs

6.2 Hooking Model-Specific UDFs

This section contains methods for hooking model-specific UDFs to ANSYS FLUENT that have been defined using DEFINE macros found in Section 2.3, and interpreted or compiled using methods described in Chapters 4 or 5, respectively.

6.2.1 Hooking DEFINE_CHEM_STEP UDFs
6.2.2 Hooking DEFINE_CPHI UDFs
6.2.3 Hooking DEFINE_DIFFUSIVITY UDFs
6.2.4 Hooking DEFINE_DOM_DIFFUSE_REFLECTIVITY UDFs
6.2.5 Hooking DEFINE_DOM_SOURCE UDFs
6.2.6 Hooking DEFINE_DOM_SPECULAR_REFLECTIVITY UDFs
6.2.7 Hooking DEFINE_EMISSIVITY_WEIGHTING_FACTOR UDFs
6.2.8 Hooking DEFINE_GRAY_BAND_ABS_COEFF UDFs
6.2.9 Hooking DEFINE_HEAT_FLUX UDFs
6.2.10 Hooking DEFINE_IGNITE_SOURCE UDFs
6.2.11 Hooking DEFINE_NET_REACTION_RATE UDFs
6.2.12 Hooking DEFINE_NOX_RATE UDFs
6.2.13 Hooking DEFINE_PR_RATE UDFs
6.2.14 Hooking DEFINE_PRANDTL UDFs
6.2.15 Hooking DEFINE_PROFILE UDFs
6.2.16 Hooking DEFINE_PROPERTY UDFs
6.2.17 Hooking DEFINE_SCAT_PHASE_FUNC UDFs
6.2.18 Hooking DEFINE_SOLAR_INTENSITY UDFs
6.2.19 Hooking DEFINE_SOURCE UDFs
6.2.20 Hooking DEFINE_SOX_RATE UDFs
6.2.21 Hooking DEFINE_SPECIFIC_HEAT UDFs
6.2.22 Hooking DEFINE_SR_RATE UDFs
6.2.23 Hooking DEFINE_TRANS UDFs
6.2.24 Hooking DEFINE_TURB_PREMIX_SOURCE UDFs
6.2.25 Hooking DEFINE_TURB_SCHMIDT UDFs
6.2.26 Hooking DEFINE_TURBULENT_VISCOSITY UDFs
6.2.27 Hooking DEFINE_VR_RATE UDFs
6.2.28 Hooking DEFINE_WALL_FUNCTIONS UDFs

Previous: 6.1.8 User-Defined Memory Storage
Up: 6. Hooking UDFs to
Next: 6.2.1 Hooking DEFINE_CHEM_STEP UDFs